OBD-II trouble code · Network / communication
U0100 Lost Communication With ECM/PCM A
Another computer in your car stopped hearing from the engine computer. The engine may not start or may run poorly, and multiple warnings can appear.
My other computers can't hear my engine brain, which is a big deal for running right. Let's check power, fuses and grounds first.
— FRED, speaking as your car
What U0100 means
U0100 sets when a module on the vehicle network expects messages from the engine or powertrain control module and doesn't receive them. The PCM may be unpowered, have a bad ground, have a wiring fault on the network, or be failing. Low battery voltage is a frequent cause. Which module reports the code and the diagnostic approach vary by make.
Common symptoms
- No-start or stalling
- Multiple warning lights
- Transmission limp mode
- Gauges not working
- Check engine light on or not able to communicate with a scanner
Likely causes (most likely first)
- Low battery voltage or bad battery connections
- Blown PCM fuse or relay
- Poor PCM ground
- Damaged CAN wiring or connector
- Water or corrosion in the PCM connector
- Failed PCM
What you can check yourself
- Test battery and charging system
- Check PCM fuses and relays
- Clean and tighten battery terminals and inspect grounds
- Inspect the PCM connector for corrosion or water
- See if your OBD-II adapter can communicate with the engine computer at all
U0100 is a network code. Today FRED reads the engine computer, so it may not see this code from other modules; a scanner that reads ABS, airbag and body modules (or a shop) can. Multi-module scanning is on FRED's roadmap.
Typical repair costs
| Repair | Typical range |
|---|---|
| Repair battery/terminals/grounds | $50–$500 |
| Replace fuse or relay | $20–$150 |
| Repair network wiring/connectors | $150–$600 |
| Replace and program PCM | $700–$2,000 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.