OBD-II trouble code · Network / communication

U0001 High Speed CAN Communication Bus

The car's main high-speed data network, which lets the computers talk to each other, has a problem. This can cause multiple warning lights or systems to stop working.

SeverityHigh
Safe to drive?Be cautious: if multiple warnings appear, the engine runs poorly, or brakes or steering assist warnings show, stop and have it checked, because key safety systems may not be working.

My computers are having trouble talking on my main network, so several systems might act up. Let's check my power and wiring before I get more confused.

— FRED, speaking as your car

What U0001 means

Modern vehicles use a Controller Area Network (CAN) to share data between the engine, transmission, ABS and other modules. U0001 sets when a module detects a fault on the high-speed CAN bus, such as missing messages, wiring problems, or bus errors. Causes include damaged wiring, poor connections, a shorted module pulling the bus down, low voltage, or water intrusion. Which modules are on the bus varies by make.

Common symptoms

  • Multiple warning lights
  • Intermittent no-start or stalling
  • Gauges not working or acting up
  • ABS, traction or airbag lights
  • Transmission limp mode

Likely causes (most likely first)

  1. Damaged, chafed or corroded CAN wiring
  2. Loose or corroded connectors
  3. A faulty module disrupting the network
  4. Low battery voltage or bad grounds
  5. Water intrusion into modules or connectors
  6. Aftermarket device interfering with the network

What you can check yourself

  1. Test the battery and charging system
  2. Unplug any aftermarket devices connected to the OBD-II port or wiring
  3. Scan all modules and note which ones report communication codes
  4. Inspect for water damage in footwells and near modules
  5. Check main grounds and battery connections

U0001 is a network code. Today FRED reads the engine computer, so it may not see this code from other modules; a scanner that reads ABS, airbag and body modules (or a shop) can. Multi-module scanning is on FRED's roadmap.

Typical repair costs

RepairTypical range
Repair CAN wiring or connectors$150–$600
Repair grounds or battery issue$100–$500
Network diagnosis (labor)$150–$400
Replace faulty module$500–$2,000

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Questions about this code? Ask Fred on the web for a plain-English explanation. For a reading from your car, use a scanner that supports this module.
Which adapter?

U0001 FAQ

Yes. Low or unstable voltage is a common cause of communication codes, so test the battery first.
It's uncommon, but faulty or poorly made plug-in devices can interfere with the network. Unplug it to test if you suspect that.

Related codes