OBD-II trouble code · Powertrain (engine and transmission)

P0600 Serial Communication Link Malfunction

The engine computer has detected a problem with an internal or dedicated data link it uses to talk to another module. This can affect shifting, gauges or other systems that rely on shared information.

SeverityHigh
Safe to drive?Drive only if the car runs and shifts normally, and keep it short and direct to a shop, because communication faults can cause stalling, limp mode or shifting problems.

Two of my brains are having trouble talking to each other, and that can make me act strangely. Let's get my wiring and voltage checked before guessing at expensive parts.

— FRED, speaking as your car

What P0600 means

P0600 sets when the PCM detects a fault in a serial communication link, which on some vehicles is an internal link between processors inside the PCM and on others is a dedicated connection to another module such as a transmission or traction control module. Causes range from wiring and connector faults to low voltage, poor grounds, or an internal module failure. What the link connects and the diagnostic approach vary widely by manufacturer.

Common symptoms

  • Check engine light on
  • Transmission in limp mode or harsh shifting
  • Other warning lights or communication codes
  • Intermittent stalling or no-start on some vehicles
  • Gauges or traction control acting up

Likely causes (most likely first)

  1. Damaged or corroded wiring or connectors on the data link
  2. Poor grounds or low system voltage
  3. Failed module on the link
  4. Internal PCM fault
  5. Water intrusion into a module or connector

What you can check yourself

  1. Test battery and charging voltage first, since low voltage causes many communication codes
  2. Scan all modules if your adapter supports it and note any U-codes
  3. Inspect PCM and transmission module connectors for corrosion, water or loose pins
  4. Check main engine and body grounds
  5. Note when the code appears, such as in rain or over bumps, to help a technician find intermittent faults

FRED reads freeze frame and live data, so you can see what the engine was doing when P0600 set, before you buy any parts.

Typical repair costs

RepairTypical range
Repair data link wiring/connectors$150–$500
Repair grounds or battery/charging issue$100–$500
Replace and program a module$600–$2,000
Diagnostic time for network fault$100–$300

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0600 FAQ

Not necessarily. Wiring, grounds and low voltage are common causes, so those should be checked before replacing any module.
Its meaning varies by manufacturer, and finding a communication fault usually requires a wiring diagram and professional scan tools.

Related codes