OBD-II trouble code · Network / communication
U0101 Lost Communication With TCM
Another computer in your car stopped hearing from the transmission computer. The transmission may go into limp mode or shift poorly.
I can't hear from my transmission computer, so I'm playing it safe in limp mode. Let's check its power and wiring.
— FRED, speaking as your car
What U0101 means
U0101 sets when a module, often the PCM, stops receiving expected messages from the transmission control module over the vehicle network. Causes include low voltage, a blown TCM fuse, poor grounds, damaged network wiring or connectors, water intrusion, or a failed TCM. TCM location varies; on some vehicles it's inside or on the transmission, and on others in the cabin or engine bay.
Common symptoms
- Transmission stuck in one gear (limp mode)
- Harsh or no shifting
- Gear indicator blank or wrong
- Multiple warning lights
- Check engine light on
Likely causes (most likely first)
- Low battery voltage
- Blown TCM fuse or relay
- Poor TCM ground
- Damaged network wiring or connectors
- Water or fluid intrusion into the TCM or connector
- Failed TCM
What you can check yourself
- Test battery and charging system
- Check the TCM fuse and relay
- Locate the TCM (repair manual) and inspect connectors for corrosion, water or fluid
- Check grounds
- See if your adapter can communicate with the TCM
U0101 is a network code. Today FRED reads the engine computer, so it may not see this code from other modules; a scanner that reads ABS, airbag and body modules (or a shop) can. Multi-module scanning is on FRED's roadmap.
Typical repair costs
| Repair | Typical range |
|---|---|
| Repair battery/grounds/fuse | $50–$400 |
| Repair network wiring/connectors | $150–$600 |
| Replace and program TCM | $600–$1,800 |
| Network diagnosis (labor) | $150–$400 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.