OBD-II trouble code · Powertrain (engine and transmission)

P0560 System Voltage Malfunction

Your car's computer has noticed the electrical system voltage isn't where it should be. This usually points to the battery, alternator, or the wiring that connects them.

SeverityModerate
Safe to drive?Drive only short distances to get it tested, because a failing charging system can leave you stranded or cause multiple systems to act up.

My electrical power isn't steady, and I depend on clean voltage for just about everything. Please check my battery, alternator and cables before I leave us stuck.

— FRED, speaking as your car

What P0560 means

The powertrain control module constantly monitors the voltage it receives from the battery and charging system. P0560 sets when that voltage is outside the expected range, unstable, or doesn't match what the module expects for a period of time. It is a general voltage fault; related codes P0562 (low) and P0563 (high) are more specific. Thresholds and the exact monitored circuit vary by make.

Common symptoms

  • Battery or charging warning light
  • Dim or flickering lights
  • Hard starting or slow cranking
  • Multiple warning lights or odd electronic behavior
  • Check engine light on

Likely causes (most likely first)

  1. Weak or failing battery
  2. Failing alternator or voltage regulator
  3. Loose or corroded battery terminals or cables
  4. Bad ground connections
  5. Worn or slipping serpentine belt
  6. Fuse or power feed problem to the control module

What you can check yourself

  1. Measure battery voltage with the engine off (about 12.4–12.7 volts is typical for a charged battery)
  2. Measure voltage with the engine running (roughly 13.5–14.7 volts is typical for many vehicles)
  3. Clean and tighten battery terminals and check main grounds
  4. Inspect the serpentine belt for wear, cracks and correct tension
  5. Have the battery and alternator load-tested (many parts stores do this free)
  6. Check live data for control module voltage and compare with the battery reading

FRED reads freeze frame and live data, so you can see what the engine was doing when P0560 set, before you buy any parts.

Typical repair costs

RepairTypical range
Clean/replace battery terminals or cables$50–$250
Replace battery$150–$350
Replace serpentine belt$100–$250
Replace alternator$400–$1,000
Repair ground or power feed wiring$100–$400

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0560 FAQ

Yes. A weak battery or poor battery connections are among the most common reasons for voltage-related codes.
Test first. A quick battery and charging system test tells you whether the battery, alternator or wiring is at fault, so you don't buy parts you don't need.

Related codes