OBD-II trouble code · Powertrain (engine and transmission)

P0700 Transmission Control System Malfunction

The transmission computer has found a problem and is telling the engine computer to turn on the check engine light. P0700 itself is a flag; the actual transmission code is stored in the transmission module.

SeverityModerate
Safe to drive?Drive gently and only as needed to get it diagnosed; if it slips, shifts harshly, won't shift, or is stuck in one gear (limp mode), avoid highways and get it checked promptly to prevent damage.

My transmission computer flagged something and asked me to light up the dash. Let's read its own codes so we know exactly what's bugging my gearbox.

— FRED, speaking as your car

What P0700 means

On vehicles with a separate transmission control module (TCM), P0700 is set by the engine computer when the TCM reports that it has stored a fault. It doesn't identify the specific problem; the TCM holds more detailed codes such as speed sensor, solenoid or pressure codes. A basic OBD-II reader may only see P0700, while a scan tool that can read the transmission module will show the specific code. How codes are reported varies by make.

Common symptoms

  • Check engine light on
  • Harsh, delayed or erratic shifting
  • Transmission stuck in one gear (limp mode)
  • Slipping or flare between gears
  • Reduced fuel economy

Likely causes (most likely first)

  1. Specific transmission fault stored in the TCM (sensor, solenoid, pressure or ratio)
  2. Low or degraded transmission fluid
  3. Faulty shift solenoid or valve body
  4. Speed sensor or range sensor fault
  5. Wiring or connector problem to the transmission
  6. TCM fault or software issue

What you can check yourself

  1. Use an adapter or app that can read the transmission module to get the specific code
  2. Check transmission fluid level and condition per the owner's manual (some sealed units need a shop)
  3. Look for fluid leaks under the car
  4. Inspect the transmission wiring connectors for damage or leaking fluid
  5. Check battery voltage, since low voltage can cause shifting codes

FRED reads freeze frame and live data, so you can see what the engine was doing when P0700 set, before you buy any parts.

Typical repair costs

RepairTypical range
Transmission fluid service$150–$400
Repair wiring or connector$100–$400
Replace sensor or solenoid$200–$800
Valve body or TCM repair/replacement$600–$2,000
Transmission rebuild or replacement$2,500–$7,000

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0700 FAQ

Many basic readers only read the engine computer. The detailed transmission code lives in the TCM, so you need a tool or app that can access that module.
It depends on the underlying code. Some are simple sensor or wiring issues; others point to internal transmission problems. Get the specific code read.

Related codes