OBD-II trouble code · Powertrain (engine and transmission)

P0113 Intake Air Temperature Circuit High Input

Your intake air temperature sensor's signal is too high, which the computer reads as extremely cold air. It's often just an unplugged sensor or broken wire.

SeverityLow
Safe to drive?Generally safe to drive; fix it when convenient to restore normal fuel control.

My air temperature sensor thinks it's arctic cold in here. Did someone forget to plug me back in after changing my air filter?

— FRED, speaking as your car

What P0113 means

P0113 sets when the IAT signal voltage stays above its maximum, which the computer interprets as implausibly cold air. This often means an open circuit, such as an unplugged connector, broken wire, or failed sensor. It frequently appears after air filter service if the sensor was not reconnected. Thresholds vary by make.

Common symptoms

  • Check-engine light on
  • Live data shows extremely cold intake air temperature
  • Possible rich running
  • Slight hesitation
  • Reduced fuel economy
  • Often no noticeable symptoms

Likely causes (most likely first)

  1. Unplugged IAT or MAF connector
  2. Open or broken signal wire
  3. Faulty IAT sensor
  4. Corroded terminals
  5. Faulty MAF with integrated IAT
  6. Poor ground

What you can check yourself

  1. Make sure the IAT or MAF connector is plugged in, especially after air filter work
  2. View live IAT; a reading around minus 40 typically indicates an open circuit
  3. Inspect wiring for breaks
  4. Measure sensor resistance against specifications
  5. Jumper test the connector per a service manual to check wiring
  6. Replace the sensor if needed

FRED reads freeze frame and live data, so you can see what the engine was doing when P0113 set, before you buy any parts.

Typical repair costs

RepairTypical range
Reconnect sensor$0–$50
Replace IAT sensor$50–$200
Repair wiring$75–$250
Replace MAF with integrated IAT$150–$450

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0113 FAQ

The IAT or MAF connector may have been unplugged or disturbed. Check that it's fully reconnected.
Yes, an active code and check-engine light will typically cause a failed emissions inspection.

Related codes