OBD-II trouble code · Powertrain (engine and transmission)
P0110 Intake Air Temperature Circuit Malfunction
The computer has detected a problem with the sensor that measures the temperature of air entering your engine. It is usually a minor issue but can affect fuel mixture.
I can't tell how warm the air I'm breathing is. It's not urgent, but let's get my air temperature sensor checked.
— FRED, speaking as your car
What P0110 means
The intake air temperature (IAT) sensor is a thermistor whose resistance changes with air temperature. P0110 is a general circuit fault: the signal was missing, erratic, or implausible. On many vehicles the IAT sensor is built into the MAF sensor. The computer may substitute a default value. Location and logic vary by make.
Common symptoms
- Check-engine light on
- Slightly rough idle
- Hard starting in cold weather
- Minor hesitation
- Reduced fuel economy
- Often no noticeable symptoms
Likely causes (most likely first)
- Faulty IAT sensor
- Damaged wiring or connector
- Faulty MAF sensor (if IAT is built in)
- Poor ground
- Corroded terminals
- Engine computer fault (rare)
What you can check yourself
- Locate the IAT sensor (air box, intake tube, or inside the MAF)
- Inspect the connector and wiring
- View the live IAT reading; on a cold engine it should be close to outside air temperature
- Measure sensor resistance with a multimeter and compare to specs
- Wiggle-test wiring while watching live data
- Replace sensor or MAF if confirmed faulty
FRED reads freeze frame and live data, so you can see what the engine was doing when P0110 set, before you buy any parts.
Typical repair costs
| Repair | Typical range |
|---|---|
| Replace IAT sensor | $50–$200 |
| Repair wiring or connector | $75–$250 |
| Replace MAF with integrated IAT | $150–$450 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.