OBD-II trouble code · Powertrain (engine and transmission)

P0720 Output Speed Sensor Circuit Malfunction

The computer isn't getting a good signal from the sensor that measures transmission output speed. This can affect shifting, the speedometer and cruise control.

SeverityModerate
Safe to drive?Drive cautiously and only to get it checked, because shifting may be erratic and the speedometer may be wrong.

My output speed sensor isn't talking right, so I'm not sure how fast my wheels are turning. Let's check it before my shifts go sideways.

— FRED, speaking as your car

What P0720 means

The output speed sensor measures how fast the transmission output shaft is turning, which closely relates to vehicle speed. The TCM uses it with input speed to calculate gear ratio and control shifting, and on some vehicles it also feeds the speedometer. P0720 sets when the signal is missing, erratic or out of range. Causes include a failed sensor, wiring or connector issues, debris on the sensor tip, or a damaged reluctor. Location and role vary by vehicle.

Common symptoms

  • Erratic or harsh shifting
  • Speedometer inaccurate or not working
  • Limp mode
  • Cruise control not working
  • Check engine light on

Likely causes (most likely first)

  1. Failed output speed sensor
  2. Damaged or corroded wiring or connector
  3. Metal debris on the sensor tip
  4. Damaged reluctor ring
  5. Low or contaminated transmission fluid
  6. TCM fault (less common)

What you can check yourself

  1. Scan for related codes such as P0500 or P0715
  2. Compare live speed readings with actual speed on a safe test drive with a passenger
  3. Inspect the sensor connector and wiring
  4. Remove an external sensor and clean the tip of any metal debris
  5. Check the fluid level and condition

FRED reads freeze frame and live data, so you can see what the engine was doing when P0720 set, before you buy any parts.

Typical repair costs

RepairTypical range
Repair wiring/connector$100–$300
Replace output speed sensor$150–$450
Fluid service$150–$400
Repair reluctor/internal component$500–$1,500

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0720 FAQ

On many vehicles, yes, because the output speed sensor is also the source for the speedometer.
If there's metal debris on the tip, cleaning may help, but debris can also hint at internal wear. If the sensor tests bad, replace it.

Related codes