OBD-II trouble code · Powertrain (engine and transmission)

P0500 Vehicle Speed Sensor Malfunction

Your car's computer isn't getting a usable signal telling it how fast the car is moving. That can affect the speedometer, shifting, cruise control and other systems that depend on vehicle speed.

SeverityModerate
Safe to drive?Usually drivable carefully for a short trip to get it checked, but the speedometer, shifting and cruise may misbehave and ABS or traction control warnings may also be on, so keep speeds modest and don't rely on the speedometer.

I've lost track of how fast we're going, and that's throwing off my shifting and speedometer. Let's get my speed sensor or its wiring looked at soon so I can stop guessing.

— FRED, speaking as your car

What P0500 means

The engine or powertrain control module watches a vehicle speed signal, which on older vehicles comes from a dedicated vehicle speed sensor (VSS) on the transmission and on many newer vehicles is calculated from the ABS wheel speed sensors and shared over the data network. P0500 sets when that signal is missing, erratic, or doesn't make sense compared with other inputs such as engine RPM and gear while the car is clearly moving. Where the speed signal comes from and the exact conditions for setting the code vary by make and model.

Common symptoms

  • Speedometer reads zero, jumps around, or is dead
  • Harsh, late or erratic transmission shifts
  • Cruise control won't engage
  • ABS or traction control light may also come on
  • Check engine light on

Likely causes (most likely first)

  1. Faulty vehicle speed sensor
  2. Damaged, corroded or loose sensor connector or wiring
  3. Faulty ABS wheel speed sensor or ABS module on vehicles that use it for vehicle speed
  4. Damaged or worn sensor reluctor/tone ring or drive gear
  5. Instrument cluster or network communication problem
  6. Control module software or internal fault (less common)

What you can check yourself

  1. Scan for other codes, especially ABS wheel speed or U-codes, since they often point to the real source
  2. Use your OBD-II adapter's live data to compare reported vehicle speed with actual speed on a safe test drive with a passenger watching the screen
  3. Find the speed sensor (check a repair manual for your vehicle) and inspect its connector and wiring for damage, oil or corrosion
  4. Unplug the sensor, check for bent pins or corrosion, and reconnect firmly
  5. If the sensor is removable, pull it and look for metal debris or damage on the tip
  6. Clear the code and see if it returns after a test drive

FRED reads freeze frame and live data, so you can see what the engine was doing when P0500 set, before you buy any parts.

Typical repair costs

RepairTypical range
Repair or clean speed sensor connector/wiring$75–$250
Replace vehicle speed sensor$120–$350
Replace ABS wheel speed sensor (if used for vehicle speed)$150–$400
Repair instrument cluster or module/software issue$200–$900

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0500 FAQ

Yes. The transmission uses vehicle speed to decide when to shift, so a missing or bad speed signal can cause harsh, early, late or no shifts, and some vehicles go into a limp mode.
On many vehicles the speedometer uses the same speed signal as the engine computer, so when that signal drops out, the speedometer often drops to zero too.

Related codes