OBD-II trouble code · Powertrain (engine and transmission)

P0501 Vehicle Speed Sensor Range/Performance

Your car is getting a speed signal, but the reading doesn't make sense compared with what the car should be doing. The computer doesn't trust it, so speedometer, shifting or cruise may act up.

SeverityModerate
Safe to drive?Generally drivable to a shop with care, but speedometer and shift quality may be unreliable, so drive conservatively and don't use cruise control.

I'm getting a speed reading, but it doesn't add up with everything else I feel. Let's find out whether it's my sensor, wiring, or tires confusing me.

— FRED, speaking as your car

What P0501 means

P0501 sets when the powertrain control module sees a vehicle speed signal that is present but out of expected range, noisy, or inconsistent with other data such as engine RPM, gear selection, throttle position or wheel speeds. It is a plausibility check rather than a dead-circuit code. Intermittent wiring, a weak sensor, wrong tire size, or an incorrect gear ratio setting can all trigger it. Setting criteria vary by manufacturer.

Common symptoms

  • Speedometer erratic, bouncing or inaccurate
  • Odd or harsh shifting
  • Cruise control drops out or won't set
  • Check engine light on, sometimes intermittently
  • Possible ABS or traction control warning

Likely causes (most likely first)

  1. Failing or intermittent vehicle speed sensor
  2. Loose, corroded or chafed sensor wiring
  3. Tire size changed or mismatched tires without recalibration
  4. Debris on the sensor tip or damaged tone ring
  5. Faulty ABS wheel speed sensor on vehicles that derive speed from ABS
  6. Incorrect module programming for tire size or axle ratio

What you can check yourself

  1. Check for other codes, especially ABS and transmission codes
  2. Confirm all four tires are the same size and the original specified size
  3. Watch live vehicle speed data while driving (with a passenger) and look for dropouts or spikes
  4. Inspect sensor connector and wiring for chafing, especially near exhaust and suspension parts
  5. Remove and clean the sensor tip if it is accessible and magnetic debris is present

FRED reads freeze frame and live data, so you can see what the engine was doing when P0501 set, before you buy any parts.

Typical repair costs

RepairTypical range
Repair wiring or connector$75–$250
Replace vehicle speed sensor$120–$350
Replace ABS wheel speed sensor$150–$400
Reprogram module for correct tire size/axle ratio$100–$250

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0501 FAQ

Yes. Changing tire size changes how many sensor pulses happen per mile. If the computer isn't recalibrated, the speed reading may not match other data and can set this code.
They're closely related. P0500 usually means the signal is missing or faulty, while P0501 means a signal is present but doesn't look believable.

Related codes