OBD-II trouble code · Chassis

C0035 Left Front Wheel Speed Sensor Circuit

The anti-lock brake computer found a problem with the left front wheel speed sensor circuit. ABS and traction control will usually turn off until it's fixed.

SeverityModerate
Safe to drive?Normal braking usually still works, but ABS and stability control may be off, so drive carefully with extra following distance; if the red brake warning light is on or the pedal feels wrong, stop and see a pro.

My left front wheel sensor isn't reporting right, so I've turned off my ABS to be safe. Please brake gently and let's get that sensor checked.

— FRED, speaking as your car

What C0035 means

Each wheel speed sensor reports how fast its wheel is turning so the ABS module can manage anti-lock braking, traction and stability control. C0035 sets when the left front sensor signal is missing, erratic, or the circuit is open or shorted. Common causes include a damaged sensor, broken wiring near the wheel, corrosion, a damaged tone ring, or a bad wheel bearing on vehicles where the tone ring is built in. Which side counts as left is the driver's side in the US. Details vary by make.

Common symptoms

  • ABS warning light on
  • Traction and stability control lights on
  • ABS activating at low speeds or not at all
  • Speedometer issues on some vehicles
  • Check engine light in some cases

Likely causes (most likely first)

  1. Failed left front wheel speed sensor
  2. Damaged or chafed sensor wiring near the wheel
  3. Corroded connector
  4. Damaged or dirty tone ring
  5. Worn wheel bearing (on vehicles with integrated tone ring)
  6. ABS module fault (less common)

What you can check yourself

  1. Scan the ABS module and confirm the code
  2. Use live data to compare all four wheel speeds while driving slowly in a safe place
  3. Safely raise and support the vehicle on jack stands, then inspect the sensor wiring for damage
  4. Check the connector for corrosion
  5. Check the tone ring and wheel bearing for damage or play, and measure sensor resistance if it's a passive sensor with a known spec

C0035 is a chassis (ABS/brakes/steering) code. Today FRED reads the engine computer, so it may not see this code from other modules; a scanner that reads ABS, airbag and body modules (or a shop) can. Multi-module scanning is on FRED's roadmap.

Typical repair costs

RepairTypical range
Repair sensor wiring or connector$100–$300
Replace wheel speed sensor$150–$400
Replace tone ring$200–$500
Replace wheel bearing/hub assembly$300–$700

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Questions about this code? Ask Fred on the web for a plain-English explanation. For a reading from your car, use a scanner that supports this module.
Which adapter?

C0035 FAQ

Usually your regular brakes work, but ABS and stability control may not. Drive carefully, and if the red brake light is on or braking feels wrong, stop and see a pro.
Yes, on many vehicles the tone ring is part of the bearing, and a worn bearing can cause an erratic signal.

Related codes