OBD-II trouble code · Powertrain (engine and transmission)

P0440 Evaporative Emission Control System Malfunction

The engine computer found a general problem with the evaporative emission (EVAP) system, which captures fuel vapor from the tank. This is often something simple like a loose or worn gas cap, but it can also be a leak, valve, or sensor problem.

SeverityLow
Safe to drive?Generally safe to drive because this code is about fuel vapor emissions, not engine operation, but get it checked so you can pass inspection. If you smell strong raw fuel or see fuel leaking, stop driving and have it inspected by a pro, because that is a fire risk.

Something in my fuel-vapor system isn't sealing or working right. Start with my gas cap, and if that isn't it, a smoke test will find the leak.

— FRED, speaking as your car

What P0440 means

The evaporative emission (EVAP) system traps fuel vapors from the fuel tank in a charcoal canister and later draws them into the engine to be burned, instead of letting them escape into the air. The PCM periodically tests the system, typically by sealing it and checking whether it holds pressure or vacuum, and by checking the purge and vent valves. This general code was set because the system did not behave as expected during a self-test. Some vehicles use this code broadly while others set more specific codes; test strategies vary by make.

Common symptoms

  • Check engine light on
  • Usually no change in how the car drives
  • Possible faint fuel smell near the car
  • Possible difficulty refueling on some vehicles
  • Failed emissions inspection

Likely causes (most likely first)

  1. Loose, damaged, or wrong gas cap
  2. Leaking EVAP hose or connection
  3. Faulty purge valve (solenoid)
  4. Faulty vent valve or solenoid
  5. Cracked charcoal canister
  6. Faulty fuel tank pressure sensor
  7. Wiring or connector problem in the EVAP circuit

What you can check yourself

  1. Remove and reinstall the gas cap until it clicks, and check its seal for cracks or debris
  2. Check for other EVAP codes that may narrow down the problem
  3. Visually inspect EVAP hoses you can reach near the engine and fuel tank for cracks or disconnected lines
  4. Inspect the purge and vent valve connectors for corrosion or damage
  5. Clear the code and drive normally for several days so the EVAP monitor can rerun
  6. If it returns, have a shop perform a smoke test to find leaks

FRED reads freeze frame and live data, so you can see what the engine was doing when P0440 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace gas cap$15–$40
Smoke test to locate leak$100–$200
Replace purge or vent valve$120–$400
Replace EVAP hose or canister$150–$700

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0440 FAQ

Sometimes. A worn or loose cap is a common and inexpensive cause, but this general code can also come from valves, hoses, or sensors.
The system must rerun its self-test, which happens only under certain conditions such as a specific fuel level and cold-start temperature. It can take several days of normal driving.

Related codes