OBD-II trouble code · Powertrain (engine and transmission)
P0136 O2 Sensor Circuit Malfunction Bank 1 Sensor 2
The computer has detected a problem with the downstream oxygen sensor on bank 1, located after the catalytic converter. This sensor mainly monitors converter efficiency.
My downstream oxygen sensor on bank 1 isn't reporting properly, so I can't keep an eye on my catalytic converter. Let's get it checked.
— FRED, speaking as your car
What P0136 means
The downstream O2 sensor (bank 1 sensor 2) monitors exhaust after the catalytic converter so the computer can check converter performance. P0136 is a general circuit fault: the signal was out of range, stuck, or implausible. Causes include a faulty sensor, wiring damage, or exhaust leaks. Details vary by make.
Common symptoms
- Check-engine light on
- Failed emissions test
- Possible catalytic converter efficiency codes
- Usually no drivability symptoms
- Slight fuel economy change on some vehicles
- Readiness monitors incomplete
Likely causes (most likely first)
- Faulty downstream O2 sensor
- Damaged wiring or connector
- Exhaust leak near the sensor
- Shorted wiring to ground or voltage
- Corroded terminals
- Engine computer fault (rare)
What you can check yourself
- Inspect wiring for damage from road debris or exhaust heat
- Check connector for corrosion
- View live downstream O2 data on a warm engine; with a healthy converter it should be fairly steady
- Check for exhaust leaks near the sensor
- Measure sensor circuits with a multimeter per a wiring diagram
- Replace sensor if confirmed faulty
FRED reads freeze frame and live data, so you can see what the engine was doing when P0136 set, before you buy any parts.
Typical repair costs
| Repair | Typical range |
|---|---|
| Replace downstream O2 sensor | $120–$350 |
| Repair wiring or connector | $100–$300 |
| Repair exhaust leak | $100–$500 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.