OBD-II trouble code · Powertrain (engine and transmission)

P0130 O2 Sensor Circuit Malfunction Bank 1 Sensor 1

The computer has detected a problem with the upstream oxygen sensor on bank 1, which measures oxygen in the exhaust before the catalytic converter. This sensor is key to fuel control.

SeverityModerate
Safe to drive?Usually safe to drive short-term, but fuel control may suffer; get it fixed soon to avoid poor economy and catalytic converter wear.

My upstream oxygen sensor on bank 1 isn't reporting properly. That's how I balance my fuel, so let's get it checked.

— FRED, speaking as your car

What P0130 means

The upstream O2 sensor (bank 1 sensor 1) reports exhaust oxygen content so the engine computer can adjust fuel. P0130 is a general circuit fault: the signal was missing, out of range, or didn't switch as expected. Causes include a failing sensor, wiring damage, or exhaust leaks. Some vehicles use wide-band air-fuel ratio sensors that behave differently, so testing varies by make.

Common symptoms

  • Check-engine light on
  • Reduced fuel economy
  • Rough idle
  • Hesitation
  • Failed emissions test
  • Possible rich or lean codes

Likely causes (most likely first)

  1. Faulty upstream O2 sensor
  2. Damaged or melted wiring
  3. Exhaust leak near the sensor
  4. Corroded connector
  5. Contaminated sensor (coolant or oil burning)
  6. Engine computer fault (rare)

What you can check yourself

  1. Inspect sensor wiring for melting or damage near exhaust parts
  2. Check for exhaust leaks near the manifold
  3. View live O2 data on a warm engine; a traditional sensor should switch rapidly, a wide-band sensor should respond to throttle changes
  4. Check connector for corrosion
  5. Look for coolant or oil burning that could contaminate the sensor
  6. Replace sensor if confirmed faulty

FRED reads freeze frame and live data, so you can see what the engine was doing when P0130 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace upstream O2 sensor$150–$400
Repair wiring or connector$100–$300
Repair exhaust leak$100–$500

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0130 FAQ

It's the oxygen sensor before the catalytic converter on the side of the engine with cylinder 1.
Many technicians recommend original-equipment or matching-spec sensors, especially for wide-band types, to avoid repeat codes.

Related codes