OBD-II trouble code · Powertrain (engine and transmission)

P0121 Throttle/Pedal Position Sensor/Switch A Circuit Range/Performance

Your throttle or pedal position sensor's reading doesn't match what the computer expects from other engine data. This often comes from a worn sensor or dirty throttle body.

SeverityHigh
Safe to drive?Drive only if throttle response is normal; if the car hesitates, surges, or limits power, drive gently to a shop and avoid highways.

My throttle sensor's story doesn't match what my airflow is telling me. A cleaning or new sensor may get us back in sync.

— FRED, speaking as your car

What P0121 means

P0121 sets when the TPS A signal is electrically valid but implausible compared to other inputs, such as MAF or MAP readings, engine rpm, or a second throttle sensor. A worn spot in the sensor track, sticking throttle, or carbon buildup can cause this. On drive-by-wire vehicles the computer may limit power. Logic varies by make.

Common symptoms

  • Check-engine light on
  • Hesitation or flat spots
  • Surging or erratic idle
  • Reduced-power mode
  • Harsh or delayed shifting
  • Stalling

Likely causes (most likely first)

  1. Worn throttle position sensor
  2. Carbon buildup in the throttle body
  3. Intermittent wiring or connector issue
  4. Faulty electronic throttle body
  5. Vacuum leak affecting airflow comparison
  6. Faulty MAF or MAP sensor (comparison input)

What you can check yourself

  1. Watch live TPS percentage while slowly moving the pedal; look for jumps or dropouts
  2. Inspect throttle body for carbon buildup
  3. Inspect connector and wiring
  4. Check for MAF or MAP codes that could affect comparison
  5. Clean the throttle body following manufacturer procedure
  6. Clear codes and road-test

FRED reads freeze frame and live data, so you can see what the engine was doing when P0121 set, before you buy any parts.

Typical repair costs

RepairTypical range
Clean throttle body$75–$200
Replace throttle position sensor$100–$300
Replace electronic throttle body$300–$900
Repair wiring$100–$300

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0121 FAQ

Sometimes, if carbon is causing sticking. If the sensor is worn, replacement is needed.
Many vehicles require an idle or throttle relearn procedure. Check your service manual or have a shop do it.

Related codes