OBD-II trouble code · Network / communication
U0155 Lost Communication With Instrument Panel Cluster (IPC) Control Module
Another computer in your car stopped hearing from the instrument cluster, the dashboard gauges. Your gauges or warning lights may not work properly.
My dashboard isn't talking to the rest of me, so you might not see my warnings. Let's get that fixed so we're both in the loop.
— FRED, speaking as your car
What U0155 means
U0155 sets when a module on the network stops receiving expected messages from the instrument panel cluster. The cluster may be unpowered, have a bad ground, have a wiring or connector issue, or be failing. Since the cluster displays speed, fuel and warning lights, losing it can hide important information. Causes and cluster design vary by make.
Common symptoms
- Gauges dead, frozen or erratic
- Warning lights not showing or all on
- Chimes not working
- Odometer not displaying
- Other communication codes
Likely causes (most likely first)
- Blown cluster fuse
- Low battery voltage
- Poor cluster ground
- Loose or damaged cluster connector
- Damaged network wiring
- Failed instrument cluster
What you can check yourself
- Test battery and charging voltage
- Check the cluster fuse
- Clean and tighten battery terminals
- Check whether the cluster lights up at all at key-on
- Inspect the cluster connector if it's accessible using a repair guide
U0155 is a network code. Today FRED reads the engine computer, so it may not see this code from other modules; a scanner that reads ABS, airbag and body modules (or a shop) can. Multi-module scanning is on FRED's roadmap.
Typical repair costs
| Repair | Typical range |
|---|---|
| Replace fuse/repair power or ground | $20–$300 |
| Repair wiring or connector | $150–$500 |
| Repair/rebuild instrument cluster | $250–$700 |
| Replace and program instrument cluster | $500–$1,500 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.