OBD-II trouble code · Powertrain (engine and transmission)

P0220 Throttle/Pedal Position Sensor/Switch B Circuit Malfunction

The engine computer found an electrical problem with throttle or pedal position sensor B. Your car may go into a reduced-power mode to stay safe.

SeverityHigh
Safe to drive?Drive only if the car responds normally and cautiously to a shop; if it's in limp mode, has unexpected acceleration issues, or won't respond properly, pull over safely and have it towed.

One of my throttle position sensors isn't making sense, so I may hold back on power to keep us safe. Take it easy and let's get it checked.

— FRED, speaking as your car

What P0220 means

Electronic throttle systems use two or more position sensors on the throttle body and on the gas pedal so the PCM can cross-check them. P0220 sets when the PCM detects a fault in the 'B' sensor circuit, such as an out-of-range signal, open, or short. Depending on the vehicle, sensor B may be on the throttle body or the accelerator pedal. Because these sensors are safety-related, the PCM often limits throttle opening (limp mode). Location and circuit layout vary by make.

Common symptoms

  • Check-engine or electronic throttle warning light
  • Reduced power or limp mode
  • Poor or no throttle response
  • Erratic idle
  • Hesitation
  • Stalling in some cases

Likely causes (most likely first)

  1. Faulty throttle position sensor B (on throttle body)
  2. Faulty accelerator pedal position sensor B
  3. Corroded or loose connector at throttle body or pedal
  4. Damaged wiring
  5. 5-volt reference or ground problem
  6. Rarely, PCM fault

What you can check yourself

  1. Scan for related throttle or pedal codes to see which sensor group is affected
  2. Use service info to find whether sensor B is on the throttle body or pedal for your vehicle
  3. Inspect the connector for corrosion, water, or loose pins
  4. Inspect wiring for damage
  5. Watch both sensor signals in live data while slowly pressing the pedal, looking for dropouts
  6. Wiggle-test wiring while watching live data

FRED reads freeze frame and live data, so you can see what the engine was doing when P0220 set, before you buy any parts.

Typical repair costs

RepairTypical range
Repair wiring or connector$100–$300
Replace accelerator pedal position sensor or pedal assembly$150–$450
Replace throttle body (sensor integrated)$300–$900

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0220 FAQ

Throttle sensors control how much the engine accelerates. When one fails, the computer limits power so the car can't accelerate unexpectedly.
Cleaning may help some idle issues, but P0220 is an electrical circuit code. Cleaning usually won't fix it.

Related codes