OBD-II trouble code · Powertrain (engine and transmission)
P0222 Throttle/Pedal Position Sensor/Switch B Circuit Low Input
The signal from throttle or pedal position sensor B is reading too low. The engine computer may limit power to keep you safe.
My throttle sensor B is reading too low, so I'm playing it safe with your power. Let's get that wiring or sensor looked at soon.
— FRED, speaking as your car
What P0222 means
The PCM monitors the voltage from throttle and pedal position sensors. P0222 sets when the sensor B signal drops below its normal minimum, often from an open signal wire, a short to ground, a missing 5-volt reference, or a failing sensor. Depending on the vehicle, sensor B may be on the throttle body or accelerator pedal. The PCM may switch to limp mode. Circuit layout varies by make.
Common symptoms
- Check-engine or electronic throttle warning
- Limp mode or reduced power
- Poor throttle response
- Rough idle
- Hesitation
- Stalling
Likely causes (most likely first)
- Failed throttle position sensor B
- Failed accelerator pedal position sensor B
- Open signal wire
- Signal shorted to ground
- Lost 5-volt reference
- Corroded connector
What you can check yourself
- Check for related codes like P0220 or P2135
- Confirm sensor B location for your vehicle in service info
- Inspect connector and pins for corrosion or damage
- Check wiring for chafing
- Watch sensor B voltage in live data for low or zero readings
- Check for 5-volt reference at the connector with key on
FRED reads freeze frame and live data, so you can see what the engine was doing when P0222 set, before you buy any parts.
Typical repair costs
| Repair | Typical range |
|---|---|
| Repair wiring or connector | $100–$300 |
| Replace accelerator pedal assembly | $150–$450 |
| Replace throttle body | $300–$900 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.