OBD-II trouble code · Powertrain (engine and transmission)

P0201 Injector Circuit Malfunction - Cylinder 1

The engine computer found an electrical problem in the fuel injector circuit for cylinder 1. That cylinder may not be getting fuel correctly, which can cause a misfire.

SeverityHigh
Safe to drive?Not recommended if the engine is misfiring or the check-engine light is flashing, because unburned fuel can overheat and damage the catalytic converter; get it repaired soon.

My cylinder 1 injector isn't talking to me properly, so that cylinder may be skipping. If I'm shaking or flashing my light, please don't push me.

— FRED, speaking as your car

What P0201 means

The PCM controls each injector by grounding or pulsing its circuit and monitors the electrical response. P0201 sets when it detects an open, short, or abnormal reading in the cylinder 1 injector circuit. The cause could be the injector itself, its connector, or wiring between the injector and PCM. A misfire code for cylinder 1 (P0301) often appears too. Which cylinder is number 1 depends on the engine; check service info.

Common symptoms

  • Check-engine light on, possibly flashing
  • Misfire or rough idle
  • Loss of power
  • Hesitation
  • Poor fuel economy
  • Fuel smell from exhaust in some cases

Likely causes (most likely first)

  1. Failed cylinder 1 fuel injector
  2. Damaged or corroded injector connector
  3. Open or shorted wiring to the injector
  4. Shared injector power or fuse problem
  5. PCM driver fault
  6. Rarely, injector driver module issue on some engines

What you can check yourself

  1. Scan for P0301 or other injector codes
  2. Locate cylinder 1 and inspect the injector connector
  3. Inspect wiring for chafing or damage
  4. Measure injector resistance and compare to the other cylinders
  5. Swap injector connectors or injectors between cylinders (where practical) to see if the problem moves
  6. Use a noid light to check for injector pulse

FRED reads freeze frame and live data, so you can see what the engine was doing when P0201 set, before you buy any parts.

Typical repair costs

RepairTypical range
Repair injector connector or wiring$100–$350
Replace cylinder 1 fuel injector (port injection)$200–$500
Replace cylinder 1 fuel injector (direct injection or diesel)$400–$1,200
PCM repair or replacement$500–$1,500

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0201 FAQ

It's not a good idea, especially if there's a misfire. It can damage the catalytic converter and cause poor drivability.
It depends on the engine layout. Usually it's at the front of the engine on the bank labeled bank 1, but check service info for your vehicle.

Related codes