OBD-II trouble code · Powertrain (engine and transmission)

P0200 Injector Circuit Malfunction

The engine computer found an electrical problem in the fuel injector circuits. It isn't pointing to one specific cylinder, so it may be a shared power or control issue.

SeverityHigh
Safe to drive?Avoid driving if the engine misfires, runs rough, or the check-engine light flashes, because misfires can damage the catalytic converter; get it diagnosed promptly.

Something's off in my fuel injector wiring. If I start shaking or my light starts flashing, please park me and let a pro take a look.

— FRED, speaking as your car

What P0200 means

The PCM switches each fuel injector on and off and monitors the electrical circuits. P0200 is a general injector circuit fault, often set when the PCM sees a problem that affects the injector system broadly, such as a shared power supply, a fuse, or an injector driver issue. On diesels and some direct-injection engines, it can relate to the injector control module or high-voltage injector circuits. Cylinder-specific codes like P0201 to P0208 usually accompany it if one injector is at fault. Behavior varies by make.

Common symptoms

  • Check-engine light on, possibly flashing
  • Rough running or misfires
  • Hard starting or no start
  • Loss of power
  • Poor fuel economy
  • Stalling

Likely causes (most likely first)

  1. Blown injector fuse or failed relay
  2. Open or shorted wiring in the injector harness
  3. Damaged or corroded injector connectors
  4. Failed injector (often with a cylinder-specific code)
  5. Injector driver or control module fault
  6. PCM fault

What you can check yourself

  1. Scan for cylinder-specific injector or misfire codes
  2. Check fuses and relays related to injectors
  3. Inspect injector harness and connectors for damage or corrosion
  4. Use a noid light or multimeter to check for power and pulse at injectors, following service info
  5. Measure injector resistance and compare between cylinders
  6. Don't keep driving if the light is flashing

FRED reads freeze frame and live data, so you can see what the engine was doing when P0200 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace fuse or relay and fix cause$20–$150
Repair injector wiring or connectors$150–$500
Replace a fuel injector$200–$600
Replace injector driver module or PCM$500–$1,800

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0200 FAQ

It's a general circuit code. If one injector is the problem, a cylinder-specific code usually appears alongside it.
Yes. Injectors often share a fused power supply, so a blown fuse can trigger this code and affect several injectors at once.

Related codes