OBD-II trouble code · Powertrain (engine and transmission)

P0191 Fuel Rail Pressure Sensor Circuit Range/Performance

The fuel rail pressure sensor's reading doesn't make sense to the engine computer for the current conditions. Either the sensor is off, or fuel pressure really is behaving abnormally.

SeverityModerate
Safe to drive?Usually drivable short-term if it runs normally, but get it checked because a real pressure problem can cause stalling; stop if you smell fuel.

My fuel pressure sensor is telling me numbers that don't add up. It could be the sensor or my actual fuel pressure, so let's test before buying parts.

— FRED, speaking as your car

What P0191 means

The PCM expects the fuel rail pressure (FRP) sensor to read within a reasonable range for conditions like key-on, idle, and acceleration. P0191 sets when the signal is out of the expected range or doesn't respond as it should, without being a full open or short. This can be a sensor that's drifting or slow, but it can also reflect a real pressure problem from a pump, regulator, or filter. Diagnosis varies by make and fuel system type.

Common symptoms

  • Check-engine light on
  • Hesitation or stumbling
  • Hard starting
  • Reduced power or limp mode
  • Rough idle
  • Stalling in some cases

Likely causes (most likely first)

  1. Faulty or drifting fuel rail pressure sensor
  2. Actual low or high fuel pressure from pump or regulator issues
  3. Clogged fuel filter
  4. Wiring resistance or corroded connector
  5. Low fuel level or contaminated fuel
  6. 5-volt reference issues

What you can check yourself

  1. Check fuel level and recent fill-up history
  2. Scan for related fuel pressure codes
  3. Watch rail pressure live data at key-on, idle, and light throttle for odd values
  4. Inspect sensor connector and wiring
  5. Check fuel filter service history
  6. A shop can compare the sensor reading against a mechanical gauge to tell sensor from real pressure

FRED reads freeze frame and live data, so you can see what the engine was doing when P0191 set, before you buy any parts.

Typical repair costs

RepairTypical range
Repair wiring or connector$100–$300
Replace fuel rail pressure sensor$150–$450
Replace fuel filter$60–$250
Repair fuel pump or regulator if pressure is truly abnormal$400–$2,500

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0191 FAQ

No. The sensor might be reporting a real pressure problem. Confirming actual pressure is the key step.
It can, if it causes real pressure to fall outside expected ranges under load.

Related codes