OBD-II trouble code · Powertrain (engine and transmission)

P0087 Fuel Rail/System Pressure - Too Low

The engine computer measured fuel pressure that's lower than it needs to be. Low fuel pressure can make the engine run lean, lose power, or stall.

SeverityHigh
Safe to drive?Not recommended beyond getting it to a shop, because low fuel pressure can cause stalling in traffic; if you smell fuel or see a leak, stop immediately, shut the engine off, and have it towed.

I'm not getting the fuel pressure I need, so I might feel weak or even stall. If you smell gas anywhere, park me and call for a tow.

— FRED, speaking as your car

What P0087 means

Many modern engines, especially diesels and gasoline direct injection (GDI) engines, have a fuel rail pressure sensor that reports actual pressure to the PCM. P0087 sets when the measured pressure stays below the desired value by more than an allowed amount. Causes include a weak low-pressure (in-tank) pump, a clogged fuel filter, a failing high-pressure pump, a stuck regulator, a leak, or a faulty pressure sensor. On diesels, running out of fuel or air in the system can also trigger it. Pressure specs and system layout vary widely by make and engine.

Common symptoms

  • Check-engine light on
  • Loss of power or limp mode
  • Hesitation or stumbling on acceleration
  • Hard starting or long cranking
  • Stalling
  • Engine misfires or lean-condition codes

Likely causes (most likely first)

  1. Weak or failing in-tank fuel pump
  2. Clogged fuel filter
  3. Failing high-pressure fuel pump (GDI or diesel)
  4. Faulty fuel pressure regulator or control valve
  5. Fuel leak in lines or rail
  6. Faulty fuel rail pressure sensor or wiring
  7. Low fuel level or contaminated fuel

What you can check yourself

  1. Confirm there's enough fuel in the tank; low fuel can trigger this on some vehicles
  2. Sniff and look for fuel leaks around lines, filter, and rail; if you find one, stop and get professional help
  3. Scan for related codes such as fuel trim, pump, or pressure sensor codes
  4. Watch desired versus actual fuel rail pressure in live data if your scanner supports it
  5. Check fuel filter service history and replace if overdue and serviceable
  6. Listen for the in-tank pump priming when the key is turned on

FRED reads freeze frame and live data, so you can see what the engine was doing when P0087 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace fuel filter$60–$250
Replace fuel rail pressure sensor$150–$450
Replace in-tank fuel pump assembly$500–$1,400
Replace high-pressure fuel pump (GDI or diesel)$600–$2,500
Repair fuel line leak$150–$600

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0087 FAQ

Yes, especially on diesels or during hard cornering with a low tank. If the code appeared after running very low, refuel, clear it, and see if it returns.
It's seen often on diesel and direct-injection gasoline engines because they have high-pressure rail systems that are closely monitored, but it can appear on other engines too.

Related codes