OBD-II trouble code · Powertrain (engine and transmission)
P0088 Fuel Rail/System Pressure - Too High
The engine computer measured fuel pressure that's higher than it should be. Excess fuel pressure can make the engine run rich and may stress fuel system parts.
My fuel pressure is running too high, which can make me run rich and strain my fuel parts. Let's get it looked at soon, and if you smell fuel, pull over and shut me down.
— FRED, speaking as your car
What P0088 means
The PCM compares actual fuel rail pressure from its pressure sensor with the desired pressure. P0088 sets when actual pressure is above the target by more than an allowed margin. Common causes include a pressure regulator or control valve stuck closed, a blocked return line on return-style systems, a faulty pressure sensor reading high, or wiring problems in the regulator control circuit. This code is more common on diesel and direct-injection engines. Specs and system design vary by make.
Common symptoms
- Check-engine light on
- Rough running or rich condition
- Black smoke on diesels
- Poor fuel economy
- Reduced power or limp mode
- Hard starting in some cases
Likely causes (most likely first)
- Fuel pressure regulator or control valve stuck
- Restricted or kinked fuel return line
- Faulty fuel rail pressure sensor reading high
- Wiring or connector fault in the regulator circuit
- High-pressure pump control valve fault
- Rarely, PCM fault
What you can check yourself
- Check for fuel leaks or fuel smell; stop and seek help if present
- Scan for related pressure sensor or regulator codes
- Compare desired versus actual rail pressure in live data
- Inspect pressure sensor and regulator connectors for corrosion or damage
- Inspect visible return lines for kinks or damage
- Verify the pressure reading looks reasonable with key on, engine off, where your scanner allows
FRED reads freeze frame and live data, so you can see what the engine was doing when P0088 set, before you buy any parts.
Typical repair costs
| Repair | Typical range |
|---|---|
| Repair regulator or sensor wiring | $100–$300 |
| Replace fuel rail pressure sensor | $150–$450 |
| Replace fuel pressure regulator or control valve | $200–$800 |
| Replace high-pressure fuel pump | $600–$2,500 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.