OBD-II trouble code · Powertrain (engine and transmission)
P0037 HO2S Heater Control Circuit Low Bank 1 Sensor 2
The heater circuit for the downstream oxygen sensor on bank 1 is reading low. Usually that means a burned-out heater or a wiring or fuse problem.
My rear bank 1 oxygen sensor's heater is reading low. Not an emergency, but I'd like it sorted before inspection day.
— FRED, speaking as your car
What P0037 means
The PCM monitors the heater circuit of the bank 1 sensor 2 oxygen sensor, which sits after the catalytic converter. P0037 sets when that circuit's voltage or current reads below the expected range, often from an open heater element, broken wire, missing power, or short to ground. The exact measuring method varies by make.
Common symptoms
- Check-engine light on
- Catalyst or O2 monitors may not complete
- Possible emissions test failure
- No noticeable drivability change in most cases
Likely causes (most likely first)
- Open heater element in bank 1 sensor 2
- Broken or chafed wiring under the vehicle
- Blown heater fuse
- Corroded connector
- Short to ground in the heater circuit
- Rarely, PCM driver fault
What you can check yourself
- Check for multiple heater codes indicating a shared fuse
- Inspect the heater fuse
- Inspect wiring and connector for road damage or corrosion
- Measure heater resistance at the sensor
- Check for power on the heater feed with the key on
- Clear the code and confirm whether it returns
FRED reads freeze frame and live data, so you can see what the engine was doing when P0037 set, before you buy any parts.
Typical repair costs
| Repair | Typical range |
|---|---|
| Fuse replacement and short repair | $20–$150 |
| Wiring or connector repair | $100–$300 |
| Replace downstream oxygen sensor (bank 1 sensor 2) | $120–$350 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.