OBD-II trouble code · Powertrain (engine and transmission)
P0031 HO2S Heater Control Circuit Low Bank 1 Sensor 1
The heater circuit for the upstream oxygen sensor on bank 1 is reading lower than expected. That usually means the heater is burned out or the circuit has an open or short.
The heater in my front bank 1 oxygen sensor is reading low. Most of the time that's a worn-out sensor, but let's peek at the fuse and wiring first.
— FRED, speaking as your car
What P0031 means
The PCM monitors the voltage or current in each oxygen sensor heater circuit. P0031 sets when the bank 1 sensor 1 heater circuit reads abnormally low, which often indicates an open heater element, a break in the wiring, a short to ground, or a missing power feed. Sensor 1 sits upstream of the catalytic converter. How the PCM measures the circuit varies by manufacturer.
Common symptoms
- Check-engine light on
- Slightly lower fuel economy
- Possible emissions test failure
- Usually no noticeable driving change
Likely causes (most likely first)
- Burned-out heater element in bank 1 sensor 1
- Open wire in the heater circuit
- Blown oxygen sensor heater fuse
- Corroded or unplugged connector
- Wiring shorted to ground near the exhaust
- Rarely, a PCM fault
What you can check yourself
- Check for other heater codes that point to a shared fuse
- Inspect and test the O2 heater fuse
- Look over the sensor wiring for melted or chafed spots
- Inspect the connector for corrosion or loose pins
- Measure heater resistance at the sensor and compare to spec
- Verify power at the heater feed wire with key on
FRED reads freeze frame and live data, so you can see what the engine was doing when P0031 set, before you buy any parts.
Typical repair costs
| Repair | Typical range |
|---|---|
| Replace fuse and fix the short that blew it | $20–$150 |
| Repair wiring or connector | $100–$300 |
| Replace upstream oxygen sensor (bank 1 sensor 1) | $150–$400 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.