OBD-II trouble code · Powertrain (engine and transmission)

P0016 Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A

The computer sees that the camshaft and crankshaft positions on bank 1 are not lined up the way they should be. This can be a sensor problem, but it can also mean the timing chain or belt has stretched or jumped.

SeverityHigh
Safe to drive?Not recommended beyond a short trip to a shop, because if timing has jumped or the chain is badly worn, continued driving can cause severe engine damage on many engines.

My camshaft and crankshaft aren't in step with each other anymore. If you hear me rattling up front, let's get my timing checked before I get hurt.

— FRED, speaking as your car

What P0016 means

The engine computer compares signals from the crankshaft position sensor and the bank 1 camshaft sensor A to make sure the camshaft and crankshaft stay in proper sync. P0016 sets when the relationship between those signals is outside the allowed range. Possible causes include a stretched timing chain, worn chain guides or tensioner, a timing belt that jumped a tooth, a faulty cam phaser or oil control solenoid, a failing sensor, or a damaged reluctor wheel. Bank 1 is the side with cylinder 1. Some engines are more prone to timing chain stretch than others, and details vary by make.

Common symptoms

  • Check-engine light on
  • Rough running or misfire
  • Hard starting or no start
  • Reduced power
  • Rattling from the timing cover, especially at startup
  • Stalling

Likely causes (most likely first)

  1. Stretched timing chain or worn guides
  2. Failing timing chain tensioner
  3. Timing belt jumped a tooth
  4. Sticking cam phaser or oil control solenoid
  5. Low or dirty engine oil
  6. Failing cam or crank sensor
  7. Damaged reluctor wheel

What you can check yourself

  1. Check engine oil level and condition
  2. Listen for rattling from the front of the engine at cold startup
  3. Scan for related cam timing or sensor codes
  4. Inspect cam and crank sensor connectors and wiring
  5. Have a shop check cam/crank correlation values or verify timing marks
  6. Do not keep driving with loud rattling or a timing belt that may have jumped

FRED reads freeze frame and live data, so you can see what the engine was doing when P0016 set, before you buy any parts.

Typical repair costs

RepairTypical range
Oil and filter change$50–$120
Replace cam or crank sensor$120–$450
Replace oil control solenoid$150–$450
Timing belt replacement$500–$1,200
Timing chain, guides, and tensioner replacement$1,000–$3,500

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0016 FAQ

No. Sensors, oil problems, and solenoids can also cause it. But a stretched or jumped timing chain or belt is a common and serious cause, so it needs proper diagnosis.
On many engines, a failing chain or belt can eventually skip or break, which can cause major internal engine damage. It is worth checking promptly.

Related codes