OBD-II trouble code · Powertrain (engine and transmission)

P0014 Exhaust Camshaft Position Timing Over-Advanced Bank 1

The variable valve timing system has moved the exhaust camshaft further than the computer asked for on bank 1. Engine oil problems and a sticking timing solenoid are common causes.

SeverityModerate
Safe to drive?Usually okay to drive gently short term after confirming oil level, but if oil is low, the engine rattles, or it runs poorly, stop and get it checked to avoid engine damage.

My exhaust camshaft timing has wandered off from where I asked it to be. Check my oil level and condition before anything else.

— FRED, speaking as your car

What P0014 means

Some engines also vary exhaust camshaft timing using oil pressure, a control solenoid, and a cam phaser. The engine computer commands a position and checks the actual position with the cam and crank sensors. P0014 sets when the bank 1 exhaust cam timing is more advanced than commanded or does not respond as expected. Low or dirty oil, wrong oil viscosity, a sticking exhaust oil control solenoid, a clogged screen, a worn phaser, or a stretched timing chain can cause it. Bank 1 is the side with cylinder 1, and design and terminology vary by make.

Common symptoms

  • Check-engine light on
  • Rough idle or stalling
  • Reduced power
  • Worse fuel economy
  • Rattling at startup
  • Hard starting in some cases

Likely causes (most likely first)

  1. Low engine oil level
  2. Dirty or wrong-viscosity oil
  3. Sticking or failing exhaust oil control solenoid
  4. Clogged oil screen
  5. Worn exhaust cam phaser
  6. Stretched timing chain or worn guides

What you can check yourself

  1. Check engine oil level and condition right away
  2. Confirm the oil used matches your owner's manual
  3. Change the oil and filter if overdue or dirty
  4. Inspect the exhaust cam solenoid connector and wiring
  5. Remove and inspect the solenoid and screen for sludge if accessible
  6. If the code returns, have the phaser and timing chain inspected

FRED reads freeze frame and live data, so you can see what the engine was doing when P0014 set, before you buy any parts.

Typical repair costs

RepairTypical range
Oil and filter change$50–$120
Replace exhaust oil control solenoid$150–$450
Replace exhaust cam phaser$800–$2,000
Timing chain and guide replacement$1,000–$3,500

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0014 FAQ

No. Only engines with variable exhaust cam timing can set P0014. Many engines vary only the intake cam.
On some engines they are identical and swapping can help diagnose, but check your service manual first, since not all are interchangeable.

Related codes