OBD-II trouble code · Powertrain (engine and transmission)

P0451 Evaporative Emission Control System Pressure Sensor Range/Performance

The fuel tank pressure sensor, which measures vapor pressure in the EVAP system, is giving a reading that doesn't make sense to the engine computer. The sensor may be faulty, or a wiring or hose problem may be affecting it.

SeverityLow
Safe to drive?Generally safe to drive because this sensor is used for vapor emissions testing, but get it fixed so the EVAP system can be monitored and you can pass inspection. If you smell strong raw fuel or see fuel leaking, stop driving and have it inspected by a pro, because that is a fire risk.

My fuel tank pressure sensor is giving me numbers I don't believe. Pop my gas cap off and see if it reads zero; if not, the sensor may be off.

— FRED, speaking as your car

What P0451 means

The evaporative emission (EVAP) system traps fuel vapors from the fuel tank in a charcoal canister and later draws them into the engine to be burned, instead of letting them escape into the air. The fuel tank pressure sensor reports small pressure and vacuum changes that the PCM uses to run leak tests. This code was set because the sensor's reading was implausible, for example not changing when the system should change, or not reading near zero when the system is open to air. The sensor is often mounted on top of the fuel tank or near the charcoal canister, and location varies by make.

Common symptoms

  • Check engine light on
  • Usually no drivability change
  • EVAP readiness monitor may not complete
  • Possible other EVAP codes
  • Failed emissions inspection

Likely causes (most likely first)

  1. Faulty fuel tank pressure sensor
  2. Damaged wiring or corroded connector
  3. Blocked or disconnected sensor hose (where used)
  4. Faulty vent valve affecting readings
  5. Overfilling the tank causing liquid fuel in vapor lines

What you can check yourself

  1. Check for other EVAP codes
  2. With your OBD-II app, view the fuel tank pressure reading with the gas cap removed; it should read near zero
  3. Reinstall the cap and watch for small changes as the engine runs and the system purges
  4. Inspect the sensor connector and wiring if accessible
  5. Check any sensor vapor hose for blockage or disconnection
  6. Avoid topping off the tank past the first pump click

FRED reads freeze frame and live data, so you can see what the engine was doing when P0451 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace fuel tank pressure sensor (accessible location)$150–$350
Replace sensor requiring fuel tank lowering$300–$700
Repair wiring or connector$100–$300
Diagnostic testing at a shop$100–$200

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0451 FAQ

On many vehicles the pressure sensor is mounted on top of the fuel tank, so the tank must be lowered to reach it. That is a job for a shop because of the fire risk with fuel.
Yes. The PCM uses this sensor for leak tests, so a bad reading can cause or mask other EVAP codes.

Related codes