OBD-II trouble code · Powertrain (engine and transmission)

P0353 Ignition Coil C Primary/Secondary Circuit Malfunction

The engine computer has found a problem in the circuit for ignition coil C, which makes the spark for one cylinder or cylinder group. This usually causes a misfire and is often a bad coil or wiring.

SeverityHigh
Safe to drive?If the engine runs smoothly and the light is steady, drive gently only to get it fixed; if it misfires heavily or the check-engine light flashes, stop driving to protect the catalytic converter.

Coil C is giving me trouble, so one of my cylinders isn't sparking right. Start with the connector and a coil swap, it's cheap and quick.

— FRED, speaking as your car

What P0353 means

The engine computer switches each ignition coil on and off to create spark and monitors those circuits for faults. P0353 sets when it detects a problem in the coil C circuit, such as an open, short, or abnormal current or spark output. Coil C often corresponds to cylinder 3, but this varies by make, and on some engines coils fire pairs of cylinders. Common causes are a failed coil, damaged wiring or connector, or a problem with the computer's coil driver.

Common symptoms

  • Check-engine light on or flashing
  • Misfire on one cylinder or cylinder pair
  • Rough idle and shaking
  • Reduced power
  • Hard starting in some cases
  • Worse fuel economy

Likely causes (most likely first)

  1. Failed ignition coil C
  2. Damaged or corroded coil connector
  3. Open or shorted wiring in the coil circuit
  4. Loss of power supply or ground to the coil
  5. Failing coil driver in the engine computer
  6. Worn spark plug that overstressed the coil

What you can check yourself

  1. Scan for misfire codes to see which cylinder is affected
  2. Identify which cylinder coil C feeds on your engine using a service diagram
  3. Inspect the coil connector for corrosion, broken locks, or bent pins
  4. Swap coil C with another coil, clear codes, and see if the fault moves
  5. Check for power at the coil connector with the key on, per the service manual
  6. Inspect the spark plug in that cylinder for wear

FRED reads freeze frame and live data, so you can see what the engine was doing when P0353 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace ignition coil$100–$350
Repair coil wiring or connector$100–$400
Replace spark plug(s)$100–$400
Repair or replace engine computer (coil driver)$500–$1,500

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0353 FAQ

On most coil-on-plug engines, basic hand tools are enough. Some engines need parts removed for access to rear coils.
Yes. Water in the coil wells, from engine washing or a leaking cowl, can cause arcing and coil faults.

Related codes