OBD-II trouble code · Powertrain (engine and transmission)

P0303 Cylinder 3 Misfire Detected

Cylinder 3 in your engine is not firing correctly, so it is not contributing its share of power. This is usually caused by a spark plug, ignition coil, or fuel injector problem on that cylinder.

SeverityHigh
Safe to drive?With a steady check-engine light you can drive gently to a shop, but if the light is flashing, stop driving, because unburned fuel can overheat and ruin the catalytic converter.

Cylinder 3 is having trouble lighting off, and I can feel it every time it misses. Let's start with its plug and coil before thinking about anything bigger.

— FRED, speaking as your car

What P0303 means

The engine computer tracks crankshaft speed and notices when the power stroke from a specific cylinder is weak or missing. When cylinder 3 misfires often enough to affect emissions or risk catalytic converter damage, the computer sets P0303. Because the problem is limited to one cylinder, the cause is usually a part dedicated to that cylinder, such as its spark plug, coil, or injector, or a mechanical problem like a leaking valve. Cylinder numbering and misfire detection vary by make, so check a diagram for your engine.

Common symptoms

  • Check-engine light on or flashing
  • Rough idle or shaking
  • Hesitation or stumble when accelerating
  • Reduced power
  • Worse fuel economy
  • Fuel smell from the exhaust

Likely causes (most likely first)

  1. Worn or fouled spark plug in cylinder 3
  2. Failing ignition coil or plug wire for cylinder 3
  3. Clogged or failing fuel injector for cylinder 3
  4. Damaged wiring or connector for that coil or injector
  5. Vacuum leak near cylinder 3
  6. Low compression from a valve, ring, or head gasket problem

What you can check yourself

  1. Confirm with your scanner which cylinder is misfiring and whether other codes are present
  2. Locate cylinder 3 using a diagram for your engine, since numbering varies by make
  3. Inspect the coil connector and wiring for damage or corrosion
  4. Swap the cylinder 3 coil with a neighboring cylinder, clear codes, and see if the misfire moves
  5. Remove and inspect the spark plug, and swap it to see if the misfire follows
  6. If the misfire stays in cylinder 3, do a compression test or have one done

FRED reads freeze frame and live data, so you can see what the engine was doing when P0303 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace spark plug(s)$100–$400
Replace ignition coil$100–$350
Replace fuel injector$200–$600
Repair coil or injector wiring$100–$350
Mechanical repair (valve or head gasket work)$1,200–$3,500

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0303 FAQ

Oil in the plug well often means a leaking valve cover or spark plug tube seal, which can soak the coil boot and cause misfires. Oil on the firing tip can point to internal wear and deserves a closer look.
No tool, just the right diagram. Search a service manual or repair database for your exact engine, since the order differs between makes and engine layouts.

Related codes