OBD-II trouble code · Powertrain (engine and transmission)
P0316 Engine Misfire Detected on Startup (First 1000 Revolutions)
Your engine misfired right after it started, during the first moments of running. This often points to something that affects cold starts, like moisture, fuel delivery, or a weak ignition part.
I stumbled right after you started me up, and then I settled down. Check whether one of my cylinders is getting extra fuel or moisture while I sit.
— FRED, speaking as your car
What P0316 means
Right after startup the engine computer watches crankshaft speed for misfires during the first 1,000 engine revolutions. If it counts too many misfires during that window, it sets P0316. This code is often stored together with a specific cylinder misfire code that tells you which cylinder was involved. Startup misfires can come from fouled plugs, weak coils, leaking or slow injectors, low fuel pressure at startup, or coolant getting into a cylinder. How often this code is used and the exact detection rules vary by make.
Common symptoms
- Rough running or shaking right after starting
- Check-engine light on
- Long cranking or hard starting
- Engine smooths out after warming up
- Fuel smell at startup
- Possible white exhaust smoke if coolant is involved
Likely causes (most likely first)
- Fouled or worn spark plugs
- Weak ignition coil that fails when cold or damp
- Leaking fuel injector flooding a cylinder after shutdown
- Low fuel pressure at startup from a weak pump or check valve
- Moisture or water in the coil wells or fuel
- Coolant entering a cylinder from a head gasket or cracked head
What you can check yourself
- Scan for cylinder-specific misfire codes stored alongside P0316
- Check coolant level when cold and watch for steady loss
- Inspect coil wells for water or oil and dry them if needed
- Pull spark plugs and look for wet fuel, coolant residue, or heavy carbon
- Have fuel pressure and pressure hold after shutdown tested
- Note whether the problem only happens after sitting overnight or in wet weather
FRED reads freeze frame and live data, so you can see what the engine was doing when P0316 set, before you buy any parts.
Typical repair costs
| Repair | Typical range |
|---|---|
| Replace spark plugs | $120–$450 |
| Replace ignition coil(s) | $100–$500 |
| Replace leaking fuel injector | $250–$700 |
| Replace fuel pump or check valve | $400–$1,200 |
| Head gasket repair | $1,500–$3,500 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.