OBD-II trouble code · Powertrain (engine and transmission)

P0307 Cylinder 7 Misfire Detected

Cylinder 7 in your engine is not firing correctly, so it is not contributing its share of power. This is usually caused by a spark plug, ignition coil, or fuel injector problem on that cylinder.

SeverityHigh
Safe to drive?With a steady check-engine light you can drive gently to a shop, but if the light is flashing, stop driving, because unburned fuel can overheat and ruin the catalytic converter.

Cylinder 7 is skipping beats, so one of my eight isn't helping out. Start with the cheap stuff, but if you hear me ticking, mention it to the mechanic.

— FRED, speaking as your car

What P0307 means

The engine computer tracks crankshaft speed and notices when the power stroke from a specific cylinder is weak or missing. When cylinder 7 misfires often enough to affect emissions or risk catalytic converter damage, the computer sets P0307. This code applies to engines with seven or more cylinders, most often V8s. Because the problem is limited to one cylinder, the cause is usually a part dedicated to that cylinder, such as its spark plug, coil, or injector, or a mechanical problem such as a worn cam lobe or lifter. Cylinder numbering varies by make, so check a diagram for your engine.

Common symptoms

  • Check-engine light on or flashing
  • Rough idle or shaking
  • Hesitation or stumble when accelerating
  • Reduced power
  • Worse fuel economy
  • Ticking or tapping noise if a valvetrain part is involved

Likely causes (most likely first)

  1. Worn or fouled spark plug in cylinder 7
  2. Failing ignition coil or plug wire for cylinder 7
  3. Clogged or failing fuel injector for cylinder 7
  4. Damaged wiring or connector for that coil or injector
  5. Vacuum leak near cylinder 7
  6. Mechanical problems such as a collapsed lifter, worn cam lobe, or leaking valve

What you can check yourself

  1. Confirm with your scanner which cylinder is misfiring and whether other codes are present
  2. Locate cylinder 7 using a diagram for your engine, since numbering varies by make
  3. Inspect the coil connector, plug wire, and wiring for damage or corrosion
  4. Swap the cylinder 7 coil with another cylinder, clear codes, and see if the misfire moves
  5. Remove and inspect the spark plug, and swap it to see if the misfire follows
  6. If the misfire stays in cylinder 7, listen for ticking and do a compression test

FRED reads freeze frame and live data, so you can see what the engine was doing when P0307 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace spark plug(s)$150–$500
Replace ignition coil or plug wire$100–$400
Replace fuel injector$250–$700
Repair coil or injector wiring$100–$350
Lifter, cam, or valve repair$1,500–$4,500

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0307 FAQ

Any cylinder can misfire. On some V8s, rear cylinders run hotter or sit near heat sources, which can wear plug wires and coils, but the cause depends on your engine.
Yes. A collapsed or stuck lifter can keep a valve from opening properly, causing a misfire that a new plug or coil will not fix. A compression test or a shop's valvetrain check can confirm it.

Related codes