OBD-II trouble code · Powertrain (engine and transmission)
P0430 Catalyst System Efficiency Below Threshold Bank 2
The engine computer thinks the catalytic converter on Bank 2 is not cleaning the exhaust as well as it should. Sometimes the converter is worn out, but sensors, exhaust leaks, or engine problems can also trigger it, so check those first.
My Bank 2 catalytic converter might be getting tired. Before we spend big money on a new one, let's make sure my oxygen sensors and exhaust aren't fibbing.
— FRED, speaking as your car
What P0430 means
The PCM compares the oxygen sensor before the converter with the one after it. A healthy converter stores oxygen, so the downstream sensor reading stays fairly steady while the upstream sensor switches back and forth. This code was set because the downstream signal on Bank 2 began to mirror the upstream signal too closely, which suggests the converter's ability to store oxygen has dropped below the calibrated threshold. Bank 2 is the side of a V6, V8 or other V/flat engine opposite cylinder number 1; inline engines do not have a Bank 2. Misfires, oil or coolant burning, fuel-mixture problems, exhaust leaks, and aging oxygen sensors can damage a converter or make it appear inefficient. Thresholds and test conditions vary by make.
Common symptoms
- Check engine light on
- Often no noticeable drivability change
- Rotten-egg (sulfur) smell from the exhaust
- Reduced power or sluggish acceleration if the converter is clogged
- Rattling under the car if the converter's internals have broken up
- Failed emissions inspection
Likely causes (most likely first)
- Worn-out or damaged catalytic converter
- Faulty or slow downstream (or upstream) oxygen sensor
- Exhaust leak near the converter or oxygen sensors
- Engine misfires that overheated the converter
- Engine burning oil or coolant, which contaminates the converter
- Rich or lean fuel mixture problem
- Software calibration issue (check for manufacturer updates)
What you can check yourself
- Scan for other codes first; fix any misfire, fuel trim, or oxygen sensor codes before blaming the converter
- Use your OBD-II app to graph the Bank 2 upstream and downstream oxygen sensors at a steady 2,000–2,500 rpm when fully warm; a downstream sensor that switches nearly as fast as the upstream one suggests reduced converter efficiency
- Listen for exhaust leaks (ticking or puffing) between the engine and the rear oxygen sensor with the engine cold
- Tap the converter lightly with a rubber mallet when cold and listen for rattling
- Check oil and coolant levels for unexplained consumption
- Ask if your manufacturer has a software update or extended emissions warranty that covers the converter
FRED reads freeze frame and live data, so you can see what the engine was doing when P0430 set, before you buy any parts.
Typical repair costs
| Repair | Typical range |
|---|---|
| Replace catalytic converter (aftermarket, where legal) | $800–$2,500 |
| Replace catalytic converter (OEM) | $1,500–$3,500 |
| Replace downstream oxygen sensor | $150–$450 |
| Repair exhaust leak | $100–$400 |
| Diagnose and fix underlying misfire or fuel issue | $150–$800 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.