OBD-II trouble code · Powertrain (engine and transmission)

P0306 Cylinder 6 Misfire Detected

Cylinder 6 in your engine is not firing correctly, so it is not contributing its share of power. This is usually caused by a spark plug, ignition coil, or fuel injector problem on that cylinder.

SeverityHigh
Safe to drive?With a steady check-engine light you can drive gently to a shop, but if the light is flashing, stop driving, because unburned fuel can overheat and ruin the catalytic converter.

My cylinder 6 keeps missing its turn to fire. Let's find out whether it's the coil, the plug, or the injector before it wears on my catalytic converter.

— FRED, speaking as your car

What P0306 means

The engine computer tracks crankshaft speed and notices when the power stroke from a specific cylinder is weak or missing. When cylinder 6 misfires often enough to affect emissions or risk catalytic converter damage, the computer sets P0306. This code applies to engines with six or more cylinders. Because the problem is limited to one cylinder, the cause is usually a part dedicated to that cylinder, such as its spark plug, coil, or injector, or a mechanical problem. Cylinder numbering and bank layout vary by make, so check a diagram for your engine.

Common symptoms

  • Check-engine light on or flashing
  • Rough idle or shaking
  • Hesitation or stumble when accelerating
  • Reduced power
  • Worse fuel economy
  • Fuel smell from the exhaust

Likely causes (most likely first)

  1. Worn or fouled spark plug in cylinder 6
  2. Failing ignition coil or plug wire for cylinder 6
  3. Clogged or failing fuel injector for cylinder 6
  4. Damaged wiring or connector for that coil or injector
  5. Vacuum leak near cylinder 6
  6. Low compression from a valve, ring, or head gasket problem

What you can check yourself

  1. Confirm with your scanner which cylinder is misfiring and whether other codes are present
  2. Locate cylinder 6 and which bank it is on using a diagram for your engine
  3. Inspect the coil connector and wiring for damage or corrosion
  4. Swap the cylinder 6 coil with another cylinder on the same bank, clear codes, and see if the misfire moves
  5. Remove and inspect the spark plug, and swap it to see if the misfire follows
  6. If the misfire stays in cylinder 6, do a compression test or have one done

FRED reads freeze frame and live data, so you can see what the engine was doing when P0306 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace spark plug(s)$120–$500
Replace ignition coil$100–$400
Replace fuel injector$250–$700
Repair coil or injector wiring$100–$350
Mechanical repair (valve or head gasket work)$1,500–$4,000

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0306 FAQ

It is usually accurate, but damaged crank sensor signals or rough roads can confuse detection on some vehicles. A coil or plug swap test helps confirm.
Fix it soon. A persistent misfire wastes fuel, raises emissions, and can damage the catalytic converter, which costs far more than a coil or plug.

Related codes