OBD-II trouble code · Powertrain (engine and transmission)

P0299 Turbocharger/Supercharger Underboost Condition

Your turbocharger or supercharger isn't making as much boost pressure as the engine computer expects. That usually means less power, and the car may go into a reduced-power mode.

SeverityModerate
Safe to drive?Usually OK to drive gently to a shop if the car runs smoothly, but expect reduced power; stop if you see heavy smoke, hear loud whining or grinding, or the check-engine light flashes.

My turbo isn't giving me the boost I'm asking for, so I'm feeling a bit sluggish. Let's check my hoses for leaks before blaming the turbo itself.

— FRED, speaking as your car

What P0299 means

On turbocharged and supercharged engines, the PCM commands a target boost pressure and checks the result with a boost or manifold pressure sensor. P0299 sets when actual boost stays below target by more than an allowed amount for a set time. Common causes include boost leaks from cracked hoses or loose intercooler clamps, a stuck-open wastegate, a faulty boost control solenoid, sticky variable-geometry vanes on diesels, a clogged air filter, or a worn turbo. Some engines can also set it from a faulty sensor. Systems and test values vary by make.

Common symptoms

  • Check-engine light on
  • Noticeable loss of power or limp mode
  • Slow acceleration
  • Whistling or hissing from a boost leak
  • Unusual turbo noise
  • Worse fuel economy

Likely causes (most likely first)

  1. Boost leak from cracked hose, loose clamp, or damaged intercooler
  2. Wastegate stuck open or actuator fault
  3. Faulty boost control solenoid or vacuum lines
  4. Sticking variable-geometry turbo vanes
  5. Clogged air filter or intake restriction
  6. Faulty boost or MAP sensor
  7. Worn or damaged turbocharger

What you can check yourself

  1. Check the air filter and intake for blockage
  2. With the engine off and cool, inspect intercooler hoses and clamps for looseness, oil, or cracks
  3. Listen for hissing under acceleration that points to a boost leak
  4. Inspect vacuum lines to the wastegate and boost solenoid
  5. Watch desired versus actual boost in live data
  6. A shop smoke test can find boost leaks quickly

FRED reads freeze frame and live data, so you can see what the engine was doing when P0299 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace air filter or clear intake restriction$30–$100
Replace boost hose or intercooler clamp$100–$400
Replace boost control solenoid$150–$450
Repair wastegate actuator$300–$1,200
Replace turbocharger$1,500–$4,000

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0299 FAQ

No. Boost leaks from hoses or clamps and control problems are frequent causes. Rule those out before replacing the turbo.
Gentle driving to a shop is usually OK, but don't ignore it. A failing turbo can get worse and cause more damage.

Related codes