OBD-II trouble code · Powertrain (engine and transmission)

P0234 Turbocharger/Supercharger Overboost Condition

The turbocharger or supercharger is making more boost pressure than the engine computer allows. The car may cut power to protect the engine.

SeverityHigh
Safe to drive?Drive gently with light throttle only to get it checked, because overboost can damage the engine; stop if you notice knocking, smoke, or the check-engine light flashes.

My turbo is pushing harder than it's supposed to, and that's risky for my engine. Keep your foot light and let's get my boost control checked.

— FRED, speaking as your car

What P0234 means

On forced-induction engines, the PCM monitors boost pressure with a sensor and controls it via a wastegate, a variable-geometry turbo, or a bypass valve. P0234 sets when actual boost exceeds the allowed maximum. Common causes include a stuck wastegate, a faulty boost control solenoid, cracked or disconnected vacuum lines to the wastegate actuator, sticky variable-geometry vanes, or a faulty boost pressure sensor. Too much boost can damage the engine, so the PCM may limit power. Systems vary widely by make.

Common symptoms

  • Check-engine light on
  • Limp mode or sudden loss of power
  • Surging or harsh power delivery
  • Engine knock or pinging
  • Boost gauge reading high (if equipped)
  • Possible overheating under load

Likely causes (most likely first)

  1. Wastegate stuck closed or actuator failure
  2. Faulty boost control solenoid
  3. Cracked or disconnected vacuum or control lines
  4. Sticking variable-geometry turbo vanes
  5. Faulty boost pressure sensor
  6. Aftermarket tuning or modifications

What you can check yourself

  1. Scan for related boost sensor or wastegate codes
  2. Inspect vacuum and control lines to the wastegate and boost solenoid for cracks
  3. Check that the wastegate actuator arm moves freely (engine off and cool)
  4. Watch desired versus actual boost in live data if your scanner supports it
  5. Inspect the boost pressure sensor connector and hose
  6. Consider whether any performance tune or modifications were added

FRED reads freeze frame and live data, so you can see what the engine was doing when P0234 set, before you buy any parts.

Typical repair costs

RepairTypical range
Replace cracked vacuum or control hoses$50–$200
Replace boost pressure sensor$100–$350
Replace boost control solenoid$150–$450
Repair or replace wastegate actuator$300–$1,200
Replace turbocharger$1,500–$4,000

Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.

Get a second opinion from your own car. Plug a $15–30 OBD-II adapter into the port under your dash, open FRED and ask “Fred, what are my codes?” Get the free beta →
Which adapter?

P0234 FAQ

Yes. Aftermarket tuning that raises boost beyond what the computer expects can trigger overboost codes.
It can be. Excessive boost increases cylinder pressure, which can cause knock and engine damage.

Related codes