OBD-II trouble code · Powertrain (engine and transmission)
P0116 Engine Coolant Temperature Circuit Range/Performance Problem
Your engine temperature sensor is working electrically, but its readings don't make sense. It may be stuck, slow, or disagree with other temperature sensors.
My temperature readings are acting a little strange. Let's check my coolant and make sure my thermostat is doing its job.
— FRED, speaking as your car
What P0116 means
P0116 sets when the ECT reading is within electrical range but implausible, such as not warming as expected, jumping erratically, or disagreeing with the intake air temperature after a long cold soak. Causes include a sluggish sensor, a stuck-open thermostat, or low coolant. Test logic varies significantly by make.
Common symptoms
- Check-engine light on
- Erratic temperature gauge
- Poor heater output
- Reduced fuel economy
- Cooling fans behaving oddly
- Rough cold idle
Likely causes (most likely first)
- Sluggish or failing ECT sensor
- Thermostat stuck open
- Low coolant level or air in the system
- Corroded connector
- Intermittent wiring fault
- Faulty gauge sender (some vehicles)
What you can check yourself
- Check coolant level with the engine cold
- After an overnight soak, compare ECT and IAT live readings; they should be close
- Watch ECT warm-up on live data for smooth, steady rise
- Feel the upper radiator hose carefully as the engine warms; very early warmth can suggest a stuck-open thermostat
- Inspect connector and wiring
- Replace sensor or thermostat as indicated
FRED reads freeze frame and live data, so you can see what the engine was doing when P0116 set, before you buy any parts.
Typical repair costs
| Repair | Typical range |
|---|---|
| Replace ECT sensor | $80–$250 |
| Replace thermostat | $150–$450 |
| Coolant service and bleeding | $100–$200 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.