OBD-II trouble code · Powertrain (engine and transmission)
P0841 Transmission Fluid Pressure Sensor/Switch A Circuit Range/Performance
The computer is getting a transmission fluid pressure reading that doesn't make sense for what it's commanding. This can be a bad sensor or switch, wiring, or an actual pressure problem.
My transmission pressure reading doesn't look right to me. Let's check my fluid level first, then that pressure switch.
— FRED, speaking as your car
What P0841 means
Many automatic transmissions use pressure sensors or switches to confirm that hydraulic pressure is present in certain circuits. P0841 sets when the reading from pressure sensor or switch A is out of the expected range or doesn't match the commanded state. Causes include a faulty switch or sensor, wiring issues, low or degraded fluid, or a real pressure problem from the pump or valve body. Switch locations and logic vary by transmission.
Common symptoms
- Harsh or delayed shifting
- Limp mode
- Slipping
- Check engine light on
- Possible no noticeable symptoms early on
Likely causes (most likely first)
- Faulty pressure sensor or switch
- Low or degraded transmission fluid
- Damaged wiring or connector
- Valve body problem
- Pump or internal pressure problem
- Internal harness fault
What you can check yourself
- Check transmission fluid level and condition first
- Look for leaks under the vehicle
- Read all transmission codes
- Inspect the transmission connector and wiring
- Ask a shop about a pressure test if the fluid is fine and the code returns
FRED reads freeze frame and live data, so you can see what the engine was doing when P0841 set, before you buy any parts.
Typical repair costs
| Repair | Typical range |
|---|---|
| Top up/service fluid | $50–$400 |
| Replace pressure switch or sensor | $200–$600 |
| Repair wiring or internal harness | $150–$800 |
| Valve body repair/replacement | $600–$2,000 |
Typical US independent-shop ranges, parts and labor. Your price varies by vehicle, region and shop.